Fluid Power Services 2026-2027

BQ45GL Series Connectors

Features

Benefits

• Factory installed quick disconnects • Hydrophobic packaging vent • Polyethylene foam gasket • Integral hose barb

• Ensures cap properly seals to bottle (even without sealing rings) • Encourages proper fluid handling protocol, allowing easy disconnection to replace or refill consumables in the correct location • Allows dispensing from container while preventing accidental spillage • Allows for mounting of 1/4” ID DIP tube

Two

Specifications Temperature

0ºC to 49ºC (32ºF to 120ºF)

Materials

Base cap – high density polyethylene Gasket – low density polyethylene Packaging vent – hydrophobic PTFE Quick disconnects – polypropylene, with 316 stainless steel springs and EPDM O-ring

Colour Blue FitQuick connector size To suit 1/4” ID tubing DIP tube interface size To suit 1/4” ID tubing

Coupling Bodies

Coupling Inserts

Quick Disconnect Interface Bottle Caps – Polyethylene Part Number

Quick Disconnect Interface Bottle Caps – Polyethylene Part Number

0800

0800

Dip Tube ID Fitquik Tube ID

Dip Tube ID Fitquik Tube ID

cBQ45GL1001

1/4”

1/4”

cBQ45GL2001

1/4”

1/4”

Integral Polypropylene Elbow Fitting Bottle Caps – Polyethylene Part Number

0800

Dip Tube ID Fitquik Tube ID

cBQ45GL5001

1/4”

1/4”

Do you also need?

Tube fittings, luer and blood pressure connectors

Chemical Compatibility Request our chemical compatibility table, to help determine which coupling is best for your fluid handling application. Colder insists that all customers test and evaluate the suitability for use of Colder couplings in their particular application.

• Shrouded design eliminates barb breakage • For tubing sizes ranging from 1/16”

Find it on pages 2.57 – 2.60

2.55