Flexihose (Plymouth) Ltd 2026-2027

BQ45GL Series Connectors

Features

Benefits

• Factory installed quick disconnects • Hydrophobic packaging vent • Polyethylene foam gasket • Integral hose barb

• Ensures cap properly seals to bottle (even without sealing rings) • Encourages proper fluid handling protocol, allowing easy disconnection to replace or refill consumables in the correct location • Allows dispensing from container while preventing accidental spillage • Allows for mounting of 1/4” ID DIP tube

Two

Specifications Temperature

0ºC to 49ºC (32ºF to 120ºF)

Materials

Base cap – high density polyethylene Gasket – low density polyethylene Packaging vent – hydrophobic PTFE Quick disconnects – polypropylene, with 316 stainless steel springs and EPDM O-ring

Colour Blue FitQuick connector size To suit 1/4” ID tubing DIP tube interface size To suit 1/4” ID tubing

Coupling Bodies

Coupling Inserts

Quick Disconnect Interface Bottle Caps – Polyethylene Part Number

Quick Disconnect Interface Bottle Caps – Polyethylene Part Number

0800

0800

Dip Tube ID Fitquik Tube ID

Dip Tube ID Fitquik Tube ID

cBQ45GL1001

1/4”

1/4”

cBQ45GL2001

1/4”

1/4”

Integral Polypropylene Elbow Fitting Bottle Caps – Polyethylene Part Number

0800

Dip Tube ID Fitquik Tube ID

cBQ45GL5001

1/4”

1/4”

Do you also need?

Tube fittings, luer and blood pressure connectors

Chemical Compatibility Request our chemical compatibility table, to help determine which coupling is best for your f l uid handling application. Colder insists that all customers test and evaluate the suitability for use of Colder couplings in their particular application.

• Shrouded design eliminates barb breakage • For tubing sizes ranging from 1/16”

Find it on pages 2.57 – 2.60

2.55