Aroplus 2026-2027

Air Receivers

Specifications Material Standard finishes

Carbon steel

Internal: raw External: painted RAL 5015 blue Other colours, other sizes, galvanised

Upon request Certification

2014/29/EU (1000 litre vertical 2014/68/UE (PED))

Working pressure

11 bar, 15 bar upon request

Fittings Kit Contents Fittings kit includes manual drain valve, relief valve and pressure gauge with adaptor for orientation.

Part Number

A mm

C mm

D inch

F inch

G inch

H inch

AIRREC-H25L 210 694 1/2 3/8 1/2 AIRREC-H50L 280 863 1/2 3/8 3/4 – AIRREC-H100L 350 1085 1/2 3/8 3/4 1/2 AIRREC-H200L 440 1350 1/2 3/8 3/4 1/2 –

Horizontal Air Receiver 11 bar Painted Blue Fittings Kit Included Part Number

1250

Capacity 25 litre 50 litre 100 litre 200 litre

Price

AIRREC-H25L AIRREC-H50L AIRREC-H100L AIRREC-H200L

£286.98 £401.14 £529.44 £968.96

Carriage for 25 to 1000 litre air receivers charged at cost

Bondloc White Label Products

Over the past three years, Bondloc has developed a range of 'White Label' safer anaerobic adhesives that offer exceptional bonding performance without hazardous, carcinogenic, mutagenic, or toxic ingredients. Safer Bonding. Zero Compromise. The Bondloc range of safer products has grown in popularity with engineering and manufacturing facilities looking for more responsible chemistries to support the environmental and occupational health agenda, which in turn reduces the requirements for COSHH assessments. This has led Bondloc to invest and expand its safer product range to include low, medium and high strength threadlockers, a WRAS approved pipe sealant, an instant gasket, a flexible gasket, and a high strength retainer. Green Performance The greener anaerobic counterparts essentially work with the same anaerobic curing process in that it cures in the absence of air and when in contact with metal ions. While standard versions may be classed as a skin irritant or corrosive, the new “white label” range is not. Warren Wilkinson, joint MD of Bondloc says: “To develop white label products, we review the base formulation; the resin structure, the monomer system, and look at what gives it strength, temperature resistance, and what is controlling the viscosity. We then look at substituting the components with a less-hazardous alternative.” “From a visual, performance and curing perspective the white label formulations are expected to work the same as the current system. It is still the same anaerobic system.”

Fifteen

15.33