Aroplus 2026-2027

Pneumatic Cylinders

Standard-Based Cylinders DSBC, to ISO 15552, Double-Acting

DSBC - A - N3 001 002 003 004 005 006 - -

Features • ISO 15552 (ISO 6431, VDMA 24562)

• Self-adjusting pneumatic end-position cushioning saves time during commissioning and adapts optimally to load and speed changes • Standard profile with two sensor slots • Wide range of variants for customised applications • Comprehensive range of mounting accessories for just about every type of installation • For position sensing • Variants with copper and zinc content less than 1% – recommended for production facilities for manufacturing lithium-ion batteries • Male thread piston rod at one end

Standard Configuration 001 Type DSBC

Product Options 1 ... 2800 mm maximum stroke Q

With protection against rotation

Double-acting standard-based cylinder

L

Low friction

U

Constant, slow movement

002

Bore Size (mm)

L1

Low friction for balancer applications

...

32, 40, 50, 63, 80, 100, 125

C

Clamping unit attached

003

Stroke (mm)

E1 E2 E3

End-position locking at both ends

End-position locking with advanced piston rod End-position locking with retracted piston rod

20, 25, 30, 40, 50, 60, 70, 80, 100, 125, 150, 160, 200, 250, 300, 320, 400, 500

...

Six

T F

Through piston rod

004

Cushioning

Female piston rod thread

PPV PPS

Pneumatic cushioning, adjustable at both ends Pneumatic cushioning, self-adjusting at both ends

D3

Sensor slot on 3 sides of the profile

P

Elastic cushioning rings / plates at both ends

R3 T1 T3 T4 P2 A1 A2 A3 A6

High corrosion protection

005

Position Sensing Via proximity switch

Heat-resistant seals up to max. 120°C Low temperature -40 ... +80°C Temperature range 0 ... +150°C

A

006

Standard

N3

Bellows on bearing cap

Conforms to ISO 15552

Increased chemical resistance

Hard scraper

Please contact us for further information

Suitable for unlubricated operation

Metal scraper

Recommended for production facilities for manufacturing lithium-ion batteries (Cu<=5%, Zn<=5%, Ni<=5%)

F1A

EX4

EU certification (II 2GD)

E... …L

Extended piston rod 1 ... 500 mm Extended piston rod thread 0 ... 70 mm

Do you also need?

Pressure regulator VRPA-LM

Industries’ growing awareness of climate protection, energy prices, and rising cost pressures has made energy efficiency a key focus. The DSBC cylinder has been designed with high integrity seals to reduce compressed air leaks, saving money. Properly sizing pneumatic cylinders and reducing compressed air pressure can significantly save energy costs.

• Regulates the operating pressure independently of the fluctuating inlet pressure

• With secondary exhaust and with return flow function • Piston regulator with through pressure supply

Every one-bar reduction in operating pressure can result in a 14% reduction in compressed air costs.

Find it on page 8.54

6.25