Aroplus 2026-2027

Leak Detectors

Locator

Description Air leaks are a concern for anyone operating a compressed air system. The average plant will have air leaks that waste up to 30% of the total air capacity. Leaks will cause compressors to run at full load for longer periods of time. The compressors will not only use more energy, but may also need additional maintenance due to the increased loads. Leaks can give the false impression that additional compressors are required to meet the demand for compressed air. The AIR-SAVER offers air loss prevention – the LOCATOR offers air loss detection!

Features / Benefits • Locates air leaks during working hours, no need to shut down production to carry out the leak audit • Supplied in a case, ensuring all components are securely together • Leaks will be detected from a distance (up to 10 metres), no need for ladders etc. • Ultrasonic leak detection to save money • SMT / solid state hybrid heterodyne receiver • Fully automatic – no maintenance • Highly effective in locating leaks and incredibly simple to apply • Very little time is required to locate leaks throughout a factory

Specifications Construction

Hand held ABS housing

Circuitry

SMT / solid state hybrid heterodyne receiver, ultrasonic processor

Frequency response

20 – 100 kHz

Indicator

10 Segment leak indication LED bar 9 Volt alkaline battery (included)

Power

Headset

Yes

Response time

300 milliseconds

Ambient operating temp.

1°C to 50°C 10 to 95%

Five

Relative humidity

Weight

0.3 kg

New

Ultrasonic Air Leak Detector Supplied with Headset Part Number

7720

Frequency Response

Price

JORC7900

£2662.97

20 – 100 kHz

Locator-EV

Description The LOCATOR-EV is light and easy to operate. The reliable and accurate detection capacity makes it a highly efficient air leak detector. Air leak turbulence or friction produce high frequency ultrasonic waves and are normally higher than 20 kHz. This is typically above the range of human hearing levels. The ultrasonic waves can travel in air and are highly directional. This directional aspect allows the LOCATOR-EV to isolate the ultrasonic sound amongst other external factory sounds. The LOCATOR-EV will prove very useful in preventive maintenance, trouble shooting, quality control and diagnostic data collection on any compressed air system.

Features / Benefits • Leaks will be detected from a distance (up to 10 metres), no need for ladders etc. • Supplied in a hard case, offering protection of the equipment • Professional headset included • Cost competitive offering a rapid pay-back • Ultrasonic leak detection to save money • Production does not need to be disturbed when the LOCATOR-EV is being used • Fully automatic – no maintenance • Private labelling is possible • Lightweight • Supplied in hard protective case, complete with headset and rubber focusing probes • Light and easy to operate • Highly effective in locating leaks, even during a running factory production • Very little time is required to locate leaks throughout a factory

Specifications Construction

Hand held ABS housing

Circuitry

SMT / solid state hybrid heterodyne receiver, ultrasonic processor

Frequency response

36 – 44 kHz

Indicator

10 Segment leak indication LED bar 9 Volt alkaline battery (included)

Power

Headset

Yes

Response time

300 milliseconds

Ambient operating temp.

1°C to 60°C 10 to 95%

Relative humidity

Weight

0.3 kg

New

Ultrasonic Air Leak Detector Supplied with Headset Part Number

7720

Frequency Response

Price

JORC7910

£1843.59

36 – 44 kHz

55.5.599