Aroplus 2026-2027

Condensate Management

Compressed Air Energy Savers

Description The AIR-SAVER tool has been helping end-users save valuable compressed air for years. It does this by preventing air from escaping unnecessarily, reducing compressor running hours, extending its lifetime, saving energy, and cutting operating costs. Typically, the AIR-SAVER is installed on the air outlet of the air receiver. In some giant factories, it can also close off certain parts of the compressed air system where no compressed air is required during certain parts of the day. Air loss occurs 24 hours daily through pipe works connections and leaking float-type drains in a typical compressed air system. By installing an AIR-SAVER, the end-user can limit these air losses to only operating hours. At the end of the working day, the AIR-SAVER will automatically close off the airflow and prevent any further loss of valuable compressed air.

Features / Benefits • No unnecessary compressor start-up during periods when compressed air is not required • Compressor, dryer and filter activities are reduced during factory closing hours • At least one air receiver’s worth of compressed air savings per day • Possibility to shut off parts of the pipe line system where compressed air is not needed continuously • Battery saves the installation set-up during power failure • Up to 16 bar • Slow valve opening to avoid hammer strike in pipe line system • Time programmed or remote controlled • Fully automatic: maintenance free • JORC7005 and JORC7007 models are micro-processor controlled (multi-cycle 7 day programme) • JORC7005 and JORC7007 models have a large LCD display showing programme cycle and current time • Compact design: easy to install • The AIR-SAVER-LS is typically connected to a light switch. By switching on the lights in the production area, the AIR-SAVER-LS will subsequently open

Specifications Pressure range

Air-Saver

Air-Saver-LS

0 to 16 bar (0 to 230 psi) Supply voltage options 115 V AC or 230 V AC 50/60 Hz (please state) Medium temperature 1ºC to 100°C Ambient temperature 1ºC to 50°C Illuminated LCD display Indicating day, time, valve status, battery life – Programmable options

Week planner, max. 100 switching points, to be distributed over 1 to 7 days

–

Valve housing material Serviceable valve Manual override Remote controllable

Brass nickel plated

Five

Yes Yes

Yes

No

Environmental protection

IP54 (NEMA13)

Air-Saver G2 Compressed Air Energy Saver Part Number

Air-Saver G1 Compressed Air Energy Saver Part Number

7720

7720

Inlet / Outlet Opening / Closing Duration Price

Inlet / Outlet Opening / Closing Duration Price

JORC7007

£961.40

2” BSP

105 sec./90°

JORC7005

£461.58

1” BSP

30 sec. / 90°

Air-Saver-LS G1 Compressed Air Energy Saver for Light Switch Installation Part Number

Air-Saver-LS G2 Compressed Air Energy Saver for Light Switch Installation Part Number

7720

7720

Inlet / Outlet Opening / Closing Duration Price

Inlet / Outlet Opening / Closing Duration Price

JORC7007LS

£813.91

JORC7005LS

£352.33

2” BSP

105 sec./90°

1” BSP

30 sec. / 90°

Air-Saver Remote Control

Description A typical compressed air system has air loss through pipe work connections, leaking float type drains, etc. At the end of the working shift, the AIR-SAVER will shut the air tank off from the rest of the system. The content of the compressed air tank will be saved, rather than lost through pipe work leakages. The REMOTE SWITCHING KIT allows you to control the AIR-SAVER remotely. This is useful when the AIR-SAVER is installed high off the ground.

Features / Benefits • Rugged industrial design

Air-Saver Remote Control Part Number

7720

Specifications Supply voltage

For Use With

Price

230 V AC max.

JORC709105

£229.43

Air-Saver G1 and G2

Switch type Cable length

3-Way (open / close or auto)

5 m

Environmental protection

IP65 (NEMA4)

55.5.511